Poultry, livestock and other breeding industries are developing rapidly, and more and more people choose to use the farm management system for scientific breeding. The farm management system uses the Internet of Things and sensor technology to remotely monitor the situation of the farm, analyze and deal with problems in various breeding links through big data, and feed back to the manager's mobile phone.
Farm management can monitor and adjust the temperature, humidity, air, and light intensity inside the breeding house, automatically supply feed, record the amount of drinking water, and monitor the production and management of aquaculture in real time.
Among them, temperature regulation is more important for aquaculture, so a built-in NTC temperature sensor is required. The NTC temperature sensor is installed inside the breeding house. The temperature sensor is used to detect the internal temperature of the breeding house. The heating cable is buried inside the ground of the breeding house. There is a wet curtain on one side of the wall, and a fan on the other side of the breeding house. The upper and lower temperature limits of the breeding house are set, and the temperature inside the breeding house is collected through the temperature sensor. When the temperature is high When the temperature is at the upper limit, the wet pad and the fan are started at the same time to cool down the inside of the breeding house. When the temperature drops below the upper temperature limit, the wet pad and the fan stop running at the same time. When the temperature is lower than the lower limit, the heating cable is heated. Start, the heating cable runs at the set temperature, keeping the breeding house at the set temperature.